Can the EcoFlow DELTA Pro (3,600Wh) Run a Pellet Stove?
Yes. With 3,600Wh of LiFePO4 battery capacity (3,060Wh usable after 85% AC inverter conversion) and a 3600W continuous / 7200W surge pure sine wave inverter, the EcoFlow DELTA Pro (3,600Wh) should run a Wood Pellet Stove (Auger, Blower & Igniter) for approximately 24.9 hrs (~1.0 days) on a single charge.
- Usable Watt-Hours: The EcoFlow DELTA Pro (3,600Wh) holds 3600Wh, which yields about 3060Wh of 120V AC power, assuming ~15% DC-to-AC inverter loss.
- Pellet Stove Duty Cycle: While active, a Pellet Stove pulls 135W (with a 450W startup spike). Over a multi-hour period, its 85% duty cycle averages ~115W per hour (plus ~8W inverter standby overhead).
- Tip: Pellet stoves have sensitive circuit boards and variable-speed combustion blowers that REQUIRE a 100% Pure Sine Wave inverter (all 10 LiFePO4 stations in our database are Pure Sine Wave). A 1,024Wh unit runs a pellet stove for ~7–8 hours; a 2,048Wh unit runs it for 14–16+ hours through the coldest night.
Compare With an Alternative
EcoFlow DELTA Pro (3,600Wh)
Multi-day outages, transfer-switch home backup & off-grid cabins
3,600Wh with a 3,600W inverter (7,200W surge) and up to 1,600W of solar input. Expandable to 10.8kWh, but at 99 lbs it's built to roll, not carry.
- 3,600Wh, the largest capacity on our list
- 3,600W continuous / 7,200W surge
- Up to 1,600W solar input; expandable to 10.8kWh with two extra batteries
Paid link. As an Amazon Associate I earn from qualifying purchases.
Jackery Explorer 2000 Plus
Well pumps, sump pumps, power tools & modular whole-home expansion
The highest-output 2kWh unit on our list: 3,000W continuous and 6,000W surge, on wheels, with expansion to about 12kWh using add-on battery packs.
- 3,000W continuous / 6,000W surge, the highest in the 2kWh class on our list
- Up to 1,400W solar input
- Rated 4,000 cycles to 70% capacity
Paid link. As an Amazon Associate I earn from qualifying purchases.
Inexpensive Add-Ons for Running a Pellet Stove on Battery
Any combustion heater should have a working CO alarm, especially during outages.
Measures what your appliance actually draws, so you size from real numbers instead of estimates.
Lets the power station sit where it's convenient without voltage drop on motor loads.
Paid links. As an Amazon Associate I earn from qualifying purchases.