Can the EcoFlow DELTA Pro (3,600Wh) Run a Gas Furnace Blower?
Yes. With 3,600Wh of LiFePO4 battery capacity (3,060Wh usable after 85% AC inverter conversion) and a 3600W continuous / 7200W surge pure sine wave inverter, the EcoFlow DELTA Pro (3,600Wh) should run a Gas / Propane Home Furnace Blower Motor for approximately 13.4 hrs on a single charge.
- Usable Watt-Hours: The EcoFlow DELTA Pro (3,600Wh) holds 3600Wh, which yields about 3060Wh of 120V AC power, assuming ~15% DC-to-AC inverter loss.
- Gas Furnace Blower Duty Cycle: While active, a Gas Furnace Blower pulls 550W (with a 1200W startup spike). Over a multi-hour period, its 40% duty cycle averages ~220W per hour (plus ~8W inverter standby overhead).
- Tip: By installing a simple $95 single-circuit EZ Generator Switch next to your furnace, you can plug a 1,800W–2,400W portable power station directly into your gas furnace during a winter blackout. Because the furnace thermostat cycles the blower on ~40% of the time (~220W average hourly draw), a 2,048Wh station keeps your whole house warm for 8–10+ hours!
Compare With an Alternative
EcoFlow DELTA Pro (3,600Wh)
Multi-day outages, transfer-switch home backup & off-grid cabins
3,600Wh with a 3,600W inverter (7,200W surge) and up to 1,600W of solar input. Expandable to 10.8kWh, but at 99 lbs it's built to roll, not carry.
- 3,600Wh, the largest capacity on our list
- 3,600W continuous / 7,200W surge
- Up to 1,600W solar input; expandable to 10.8kWh with two extra batteries
Paid link. As an Amazon Associate I earn from qualifying purchases.
Anker SOLIX F2000 (PowerHouse 767)
RVs (TT-30 outlet), easy rolling mobility & whole-room backup
A 2,048Wh unit with wheels and a telescoping handle, plus a NEMA TT-30 RV outlet alongside 4 household AC outlets.
- Wheels and telescoping handle; no lifting needed on flat ground
- NEMA TT-30 RV outlet plus 4 household AC outlets
- 2,400W continuous / 3,600W surge
Paid link. As an Amazon Associate I earn from qualifying purchases.
Inexpensive Add-Ons for Running a Gas Furnace Blower on Battery
Lets a power station plug into a hardwired furnace. Have an electrician install it.
Measures what your appliance actually draws, so you size from real numbers instead of estimates.
Lets the power station sit where it's convenient without voltage drop on motor loads.
Paid links. As an Amazon Associate I earn from qualifying purchases.