Can the Anker SOLIX C1000 Run a Gas Furnace Blower?
Yes. With 1,056Wh of LiFePO4 battery capacity (898Wh usable after 85% AC inverter conversion) and a 1800W continuous / 2400W surge pure sine wave inverter, the Anker SOLIX C1000 should run a Gas / Propane Home Furnace Blower Motor for approximately 3.9 hrs on a single charge.
- Usable Watt-Hours: The Anker SOLIX C1000 holds 1056Wh, which yields about 898Wh of 120V AC power, assuming ~15% DC-to-AC inverter loss.
- Gas Furnace Blower Duty Cycle: While active, a Gas Furnace Blower pulls 550W (with a 1200W startup spike). Over a multi-hour period, its 40% duty cycle averages ~220W per hour (plus ~8W inverter standby overhead).
- Tip: By installing a simple $95 single-circuit EZ Generator Switch next to your furnace, you can plug a 1,800W–2,400W portable power station directly into your gas furnace during a winter blackout. Because the furnace thermostat cycles the blower on ~40% of the time (~220W average hourly draw), a 2,048Wh station keeps your whole house warm for 8–10+ hours!
Compare With an Alternative
Anker SOLIX C1000
Solar recharging, kitchen appliances & expandable home backup
A 1,056Wh unit with the highest solar input in its class on our list (600W), UPS switchover under 20ms, and expansion to 2,112Wh with Anker's BP1000 battery.
- 600W max solar input, the highest of the 1kWh-class units on our list
- UPS mode with <20ms switchover
- Expandable to 2,112Wh with the BP1000 expansion battery
Paid link. As an Amazon Associate I earn from qualifying purchases.
EcoFlow DELTA Pro (3,600Wh)
Multi-day outages, transfer-switch home backup & off-grid cabins
3,600Wh with a 3,600W inverter (7,200W surge) and up to 1,600W of solar input. Expandable to 10.8kWh, but at 99 lbs it's built to roll, not carry.
- 3,600Wh, the largest capacity on our list
- 3,600W continuous / 7,200W surge
- Up to 1,600W solar input; expandable to 10.8kWh with two extra batteries
Paid link. As an Amazon Associate I earn from qualifying purchases.
Inexpensive Add-Ons for Running a Gas Furnace Blower on Battery
Lets a power station plug into a hardwired furnace. Have an electrician install it.
Measures what your appliance actually draws, so you size from real numbers instead of estimates.
Lets the power station sit where it's convenient without voltage drop on motor loads.
Paid links. As an Amazon Associate I earn from qualifying purchases.