Can the Anker SOLIX F2000 (PowerHouse 767) Run a Pellet Stove?
Yes. With 2,048Wh of LiFePO4 battery capacity (1,741Wh usable after 85% AC inverter conversion) and a 2400W continuous / 3600W surge pure sine wave inverter, the Anker SOLIX F2000 (PowerHouse 767) should run a Wood Pellet Stove (Auger, Blower & Igniter) for approximately 14.2 hrs on a single charge.
- Usable Watt-Hours: The Anker SOLIX F2000 (PowerHouse 767) holds 2048Wh, which yields about 1741Wh of 120V AC power, assuming ~15% DC-to-AC inverter loss.
- Pellet Stove Duty Cycle: While active, a Pellet Stove pulls 135W (with a 450W startup spike). Over a multi-hour period, its 85% duty cycle averages ~115W per hour (plus ~8W inverter standby overhead).
- Tip: Pellet stoves have sensitive circuit boards and variable-speed combustion blowers that REQUIRE a 100% Pure Sine Wave inverter (all 10 LiFePO4 stations in our database are Pure Sine Wave). A 1,024Wh unit runs a pellet stove for ~7–8 hours; a 2,048Wh unit runs it for 14–16+ hours through the coldest night.
Compare With an Alternative
Anker SOLIX F2000 (PowerHouse 767)
RVs (TT-30 outlet), easy rolling mobility & whole-room backup
A 2,048Wh unit with wheels and a telescoping handle, plus a NEMA TT-30 RV outlet alongside 4 household AC outlets.
- Wheels and telescoping handle; no lifting needed on flat ground
- NEMA TT-30 RV outlet plus 4 household AC outlets
- 2,400W continuous / 3,600W surge
Paid link. As an Amazon Associate I earn from qualifying purchases.
Jackery Explorer 2000 Plus
Well pumps, sump pumps, power tools & modular whole-home expansion
The highest-output 2kWh unit on our list: 3,000W continuous and 6,000W surge, on wheels, with expansion to about 12kWh using add-on battery packs.
- 3,000W continuous / 6,000W surge, the highest in the 2kWh class on our list
- Up to 1,400W solar input
- Rated 4,000 cycles to 70% capacity
Paid link. As an Amazon Associate I earn from qualifying purchases.
Inexpensive Add-Ons for Running a Pellet Stove on Battery
Any combustion heater should have a working CO alarm, especially during outages.
Measures what your appliance actually draws, so you size from real numbers instead of estimates.
Lets the power station sit where it's convenient without voltage drop on motor loads.
Paid links. As an Amazon Associate I earn from qualifying purchases.