Can the Anker SOLIX F2000 (PowerHouse 767) Run a CPAP Machine?
Yes. With 2,048Wh of LiFePO4 battery capacity (1,741Wh usable after 85% AC inverter conversion) and a 2400W continuous / 3600W surge pure sine wave inverter, the Anker SOLIX F2000 (PowerHouse 767) should run a CPAP / BiPAP Machine (Standard Mode) for approximately 32.8 hrs (~1.4 days) on a single charge.
- Usable Watt-Hours: The Anker SOLIX F2000 (PowerHouse 767) holds 2048Wh, which yields about 1741Wh of 120V AC power, assuming ~15% DC-to-AC inverter loss.
- CPAP Machine Duty Cycle: While active, a CPAP Machine pulls 45W (with a 60W startup spike). Over a multi-hour period, its 100% duty cycle averages ~45W per hour (plus ~8W inverter standby overhead).
- Tip: Look for a power station with UPS/EPS (<20ms Auto-Switchover) like the Jackery 1000 v2, Anker SOLIX C1000, or EcoFlow DELTA 2. You plug the power station into the wall and your CPAP into the power station—if the grid goes down at 2:00 AM, your CPAP stays on without skipping a breath.
Compare With an Alternative
Anker SOLIX F2000 (PowerHouse 767)
RVs (TT-30 outlet), easy rolling mobility & whole-room backup
A 2,048Wh unit with wheels and a telescoping handle, plus a NEMA TT-30 RV outlet alongside 4 household AC outlets.
- Wheels and telescoping handle; no lifting needed on flat ground
- NEMA TT-30 RV outlet plus 4 household AC outlets
- 2,400W continuous / 3,600W surge
Paid link. As an Amazon Associate I earn from qualifying purchases.
EcoFlow DELTA 2
Full-size refrigerators, coffee makers, microwaves & 1-day home blackouts
A balanced 1kWh-class unit: a 1,800W inverter (2,700W surge) covers most single household appliances, it weighs 27 lbs, and it can expand to 3,040Wh later with an extra battery.
- 1,800W continuous / 2,700W surge handles fridges, coffee makers and microwaves (one at a time)
- 0–80% wall charge in about 50 minutes (EcoFlow spec)
- Expandable to 3,040Wh with an extra battery
Paid link. As an Amazon Associate I earn from qualifying purchases.
Inexpensive Add-Ons for Running a CPAP Machine on Battery
Running a CPAP from the 12V/DC port skips inverter losses and can roughly double runtime.
Measures what your appliance actually draws, so you size from real numbers instead of estimates.
Lets the power station sit where it's convenient without voltage drop on motor loads.
Paid links. As an Amazon Associate I earn from qualifying purchases.