Can the Jackery Explorer 1000 v2 Run a Sump Pump (1/3 HP)?
Yes. With 1,070Wh of LiFePO4 battery capacity (910Wh usable after 85% AC inverter conversion) and a 1500W continuous / 3000W surge pure sine wave inverter, the Jackery Explorer 1000 v2 should run a Basement Sump Pump (1/3 HP Submersible) for approximately 7.1 hrs on a single charge.
- Usable Watt-Hours: The Jackery Explorer 1000 v2 holds 1070Wh, which yields about 910Wh of 120V AC power, assuming ~15% DC-to-AC inverter loss.
- Sump Pump (1/3 HP) Duty Cycle: While active, a Sump Pump (1/3 HP) pulls 800W (with a 1800W startup spike). Over a multi-hour period, its 15% duty cycle averages ~120W per hour (plus ~8W inverter standby overhead).
- Tip: Sump pumps are all about STARTING SURGE. A 1/3 HP pump draws 800W while pumping, but demands 1,600W–2,000W for a split second to spin up the impeller against water pressure. Never use a power station rated below 1,800W continuous / 2,400W+ surge.
Compare With an Alternative
Jackery Explorer 1000 v2
Easy-to-carry home backup, refrigerators, CPAP & family camping
The lightest 1kWh-class unit on our list at 23.8 lbs. Its 3,000W surge rating gives good headroom for starting motors like fridge compressors.
- Lightest 1kWh-class unit on our list (23.8 lbs)
- Rated 4,000 cycles to 70% capacity
- 3,000W surge rating, the highest in the 1kWh class on our list
Paid link. As an Amazon Associate I earn from qualifying purchases.
Jackery Explorer 2000 Plus
Well pumps, sump pumps, power tools & modular whole-home expansion
The highest-output 2kWh unit on our list: 3,000W continuous and 6,000W surge, on wheels, with expansion to about 12kWh using add-on battery packs.
- 3,000W continuous / 6,000W surge, the highest in the 2kWh class on our list
- Up to 1,400W solar input
- Rated 4,000 cycles to 70% capacity
Paid link. As an Amazon Associate I earn from qualifying purchases.
Inexpensive Add-Ons for Running a Sump Pump (1/3 HP) on Battery
Warns you early if water starts rising before the battery or pump gives out.
Measures what your appliance actually draws, so you size from real numbers instead of estimates.
Lets the power station sit where it's convenient without voltage drop on motor loads.
Paid links. As an Amazon Associate I earn from qualifying purchases.